I can't control the device when connected with Wi-Fi (wireless).

Device screen control might not be available on devices that are not directly supported by Mobizen (Android 5.0 or lower, Nexus, Sony, Motorola, Xiaomi, Huawei) due to lack of control permission.

To help to solve this issue, Booster mode can be enabled to obtain the permission and allow screen control.

Download the Mobizen Mirroing Application and connect the device using USB to enable the Booster mode.

[Booster Mode pre-requirements]

No. Requirement What do to
1 USB Debugging Settings > Developer Option > USB Debugging
2 Install Mobizen PC application Download
3 Connect between PC and Mobile device Connect using USB cable
4 USB driver installation Run Mobizen PC application to install the unified driver
5 Allow USB debugging 
(using RSA key from the PC)
Check Box then accept the USB debugging of the PC

Please follow the instructions below in the set order.

 

Enabling USB debugging mode

1. Install Mobizen PC.
    Visit www.mobizen.com, download the PC program and install it.
 
2. Enable USB Debugging mode
    On the mobile device, go to "Settings" > "Developer Options" > "USB Debugging" > check the box to enable it.
 
If you cannot find [Developer Option] Menu, 
you need to gain developer authority with your Android.

Learn how to enable Developer Option

 
 

 

3. Connect PC and mobile device via USB and install the driver

– Connect the mobile device to your computer using the USB cable.
(Go to Step. 5, if USB driver and Mobizen application had already been installed, USB debugging allowance will then pop up and ask for your permission.)

– You must run Mobizen after connecting the mobile device to your PC using a USB cable. A unified USB driver will be installed, as shown in the pictures below.

 
 

4. Allow the USB debugging

– When the Unified USB Driver installation has ended, allow USB debugging, as shown below on the mobile device. Check the box “always allow to connect to this PC,” then click the ‘OK’ button.
 
 

5. Booster Mode has started!

If Booster Mode has successfully activated, you will be notified as below, and Booster Mode will remain activated until the next reboot.
*If your device has rebooted, keep your mobile device connected to your computer (Mobizen PC application installed) using the USB cable until the booster mode activation message displayed

 

 

Learn how to activate Booster Mode on YouTube!

Comments 0